News & Insights

Are UK homes ready for heatwaves?

More than half of UK homes already fail the criteria for avoiding overheating. That share rises to around 90% with 2°C of global warming, and almost all homes at 4°C. Drawing on research commissioned by the Climate Change Committee, this article explains measures that can be used to prevent overheating in the existing UK building stock, and why energy efficiency and climate resilience are not the same thing.

By Blythe Sharman

Built for the cold: Why the UK’s homes need to be ready for the heat

For most of the past century, a UK home had one main job: keep the heat in. Building regulations, insulation grants and retrofit programmes have all pushed the same way, towards less heat loss and lower winter energy demand. Although this made sense for the climate we once had, it has left UK homes vulnerable to the hot summers we have experienced, and to the ones still to come.

In the UK we spend around 90% of our time indoors, and about two-thirds of that time at home, according to the UK Health Security Agency. Over a week we might move between home, office, gym and shops. Home is still where we sleep and recover, and for a growing number of people it is also where they work. No other building we use shapes our health, comfort and wellbeing as directly. Therefore, whether our homes can still safely fulfil our needs while coping with a changing climate is a question that needs to be addressed.

Most homes were never designed for prolonged heat

In 2022 the Climate Change Committee commissioned Arup to assess overheating risk across the UK’s existing housing stock. The study found that around 55% of UK homes, roughly 15.7 million, fail the criteria for avoiding overheating under the current climate.

Most of those failures occur in our bedrooms at night. The current standard counts a bedroom as overheating if it sits above 26°C indoors for more than around 32 night-time hours a year. In the scenario that global warming reaches 2°C, around 90% of existing homes would overheat. At 4°C, almost all homes would.

New homes in the UK must now be designed to avoid overheating. Existing homes face no such requirement, and most of them, around 70%, will still be lived in by 2050. For the people living in them, heat is more than just a comfort issue. Overheating disrupts sleep, affects health and productivity, and will cause significantly more deaths as temperatures rise.

Energy efficiency is not the same as resilience

The UK is insulating millions of homes to cut carbon, which surely should help prevent overheating too? The answer is not always, and retrofit outcomes vary by type of home.

Modelling by Arup found that roof insulation reduced overheating risk in the majority of homes, largely because bedrooms and loft rooms sit directly under the roof, whereas wall insulation was less predictable. In homes where windows open only a little and natural ventilation can’t clear heat effectively, extra wall insulation increased overheating risk by trapping heat inside. Where ventilation was good, particularly where air could move through the home from one side to the other, the same insulation helped by cutting the heat coming in through the walls.

A measure that improves winter energy performance can undermine summer comfort when the whole building is not examined. An energy-efficient home and a climate-resilient home are not automatically the same thing. Achieving both requires a whole-building approach to retrofit, in which heating and cooling performance are designed together rather than one measure at a time.

Keeping the heat out

Shading is the most dependable measure for keeping the heat out of our homes. External shutters performed best in Arup’s analysis because they stop solar radiation before it reaches the glass. Blinds and internal shutters also helped, though less: by the time sunlight reaches an internal blind, much of its heat is already in the room.

Keeping bedrooms cool at night was helped most by ventilation, with larger openable window areas allowing more air exchange and lower bedroom temperatures.

These simple retrofit options matter because the alternative is active cooling. Arup estimates that under a 4°C scenario, running air conditioning across the stock would add about £4 billion a year in energy costs and 2 million tonnes of carbon emissions annually. The report recommends regulating the installation and use of domestic air conditioning, so that passive measures are considered and used first.

The cost of heat-resilient retrofit

Arup estimates that bringing every failing home in the UK up to overheating criteria in today’s climate would cost around £250 billion, roughly £15,000 per home needing work. In warmer predictions the costs soar. With 2°C of warming, the total rises to around £559 billion, and with 4°C it is around £488 billion.

The 4°C figure is lower for an uncomfortable reason. At that level of warming, passive measures can no longer protect most homes, so cheaper-to-install air conditioning would be needed.

Who is most vulnerable

Overheating does not fall evenly, and lower socioeconomic groups are often at the greatest risk. They are more likely to live in poorly designed homes, flats in particular, and less able to pay for measures that would bring indoor temperatures down. The cost of mitigation falls on whoever owns the home, which leaves tenants and lower-income households with little control over their own exposure.

If protection from heat depends on being able to afford shutters, new windows or air conditioning, the households least able to cope would be the last to be protected.

Designing for a changing climate

There is no single fix. Insulation, ventilation, shading and, where unavoidable, cooling all have a part to play, but they work in tandem with the existing building. How a home is understood and operated matters as much as what is installed: Arup found that occupants who open windows and close blinds at the right times can cut night-time overheating substantially without any capital spend.

The UK has spent decades asking how much energy its homes use. The question now is how well they will hold up in the climate they are going to face. Retrofit has to be designed to answer both.

‍

Image credit: Dominic Nelson, via Wikimedia Commons, CC BY-SA 4.0

‍

Related Posts

What's The Difference Between MEES, CRREM and GRESB?

September 25, 2026

What's the Highest Controllable Cost in Your Building?

September 10, 2026

Start Saving with xWatts

Speak to our team to find out how we can help you cut costs now

Find out your savings potential